inside diameter

inside diameter

美 　英

• na.内径
• 网络内径尺寸；内部直径；胶管内径

英汉解释

na.

1. 内径

例句

Note that the nominal inside diameter is not the same as the drift diameter but is always slightly larger.

注意到名义内径并非通径规的直径，但是总是稍大于通径规的直径。

The kelly bushing (KB) has an inside diameter profile that matches that of the kelly, usually square or hexagonal.

方钻杆补心的内径通常与方钻杆的外径（通常是四方钻杆或六方钻杆）相匹配。

The inside diameter of all sleeves shall have appropriate clearance for outside diameter of line conductors and ground wires to be jointed.

所有套管的内截直径应有合适的间隙以便地线和导线能很好的连接。

In this case, the inside diameter of the body is too small for the linkage.

在此情况下，本体内径太小，不适合连结装置。

The drift diameter is the inside diameter (ID) that the pipe manufacturer guarantees per specifications.

通径规的直径就是管子生产商所能够确保的每一管子说明书上的内径。

The sprue leads into a circular recess (Figure 4. 21), slightly smaller than the inside diameter of the tube.

主流道引入到一个比管子内径稍小的圆形凹坑。

The inside diameter has more impurities and inclusions, which can be machined away.

内径处则有较多的杂质和内含物，但可用机加工去除。

LARGE INSIDE DIAMETER : The large end of the cup raceway.

外圈小端内径：外圈滚道面较大一端。

The author puts forward the way of measuring the inside diameter of the micropipette.

提出了精确测量微针内径的折射率法；

This thesis introduces them separately. 5. Research the inside diameter of injector base and analyze the course of image processing.

研究汽车喷油器底座内径图像的特点，对图像处理的流程进行了介绍。

Inside diameter of fitting should match inside diameter of pipe as specified by purchaser.

如果购买者要求，连接件的内径应该适应管道的内径。

A large-diameter (3- to 5-in. inside diameter), high-pressure flexible line used to connect the standpipe to the swivel.

大直径（内径为3英寸到5英寸之间）的高压活动管线，用于连接立管与水龙头。

The basic idea is to simulate a Well by using a transparent vinyl tube (6mm inside diameter).

基本思路是用透明乙烯管（内径6mm）模拟“油井”。

Max. inside diameter is suitable for below 1000 core optical cable or below 4002 cable.

特大孔内径适用于1000芯以下光缆或4002以下电缆。

based on the inside diameter of the hose.

在软管直径内部的基础上。

Several sizes are available in the inside diameter range 20 to 48 mm .

该轴承可供应几个尺寸，内径范围为20-48毫米。

Research on the Xian Qin Huangzhong Pipe: An Attempt to Calculate the Inside Diameter of Huangzhong Pipe with Modern Acoustic Formula

先秦黄钟律管考——利用现代声学公式推测先秦黄钟律管管径的尝试

Derivation of mechanical equation for inside diameter deformation due to temperature in circle workpiece

环状工件内径温度变形的力学推导

Improving the Weld Pipe Inside Diameter Adjustment Methods and Improving the Ratio of Materials Automobile Driving Axle Pipe

改进焊管内径调整技术提高汽车传动轴管成材率

Changes of cardiac inside diameter and ejection fraction in patients with heart failure after the treatment with nitroprusside

心衰患者硝普钠治疗前后心脏内径与射血分数变化的研究

Edge preparation for welding; matching of inside diameter for circumferential welds on seamless pipes

焊缝预加工.无缝管圆周焊缝内径的配接

Comparison table for inside diameter, connector with metric threads to inside diameter, conduits

公制螺纹接头内径与软管内径对照表

Inside diameter required precision seamless steel tube for hydraulic and pneumatic cylinder use

液压和气动缸筒用精密内径无缝钢管

Inside diameter measurement and its necessity

内径测量及必需品

Comparison table for inside diameter, connector with PG threads to inside diameter, conduits

螺纹接头内径与软管内径对照表

the diameter of the sealing structure is matched with the inside diameter of the base;

所述密封结构的直径与所述底座的内径相匹配；

Plain bearings - Checking of wrapped bushes - Checking the inside diameter

滑动轴承.卷制衬套的检验.内径检验

Measuring the Space Between Counter Bores with Improved Inside Diameter Dial gauge

改装内径百分表测量沉孔距

Plain bearings - Wrapped bushes - Test data for outside and inside diameter

滑动轴承.外衬套.外径和内径试验数据

Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Wall Drain Pipe and Fittings Based on Controlled Inside Diameter

标准规格为聚（氯乙烯）（聚氯乙烯）简介墙排水管及配件的基础上控制的内直径

Measurement of Connector Ferrule Hole Inside Diameter

连接器密套环孔内径的测量

Experimental observation for inside diameter of micrangium of venous skin flaps nurtured by venous blood

静脉血营养的静脉皮瓣微血管内径变化的实验观察

Plain bearings - Checking of wrapped bushes - Part 2: Checking the inside diameter

滑动轴承.卷制衬套的检验.第2部分：内径检验

Plain bearings - Wrapped bushes - Part 2: Test data for outside and inside diameter

水平轴承.外衬套.第2部分：外径和内径试验数据

center to end end to end flange and face face to face diameter nominal diameter inside diameter outnide diameter dimension

中心至端部端到端法兰端面面到面直径公称直径内径外径尺寸英文名称

Tank of finished inside-diameter weld with flange

内径精加工后的缸体与法兰盘的焊接

Inside diameter of roller cylinder

揉筒内径

Oridinarily have the greater inside diameter

一般具有较大内径

Inside diameter of finger ring(cm)

戒指内径（厘米）

Inside diameter of label roll

纸卷内径